iPECS LDP-9008D Page 136 User Manual Download

Page: 136 / 192

LIP-8012E & LIP-8024E Gigabit Phone

User Guide

2.1.5

Attendant menu (iPECS-LIK & iPECS SBG-1000)

The Attendant menu is only available on the System
Attendant phone.

In iPECS-

eMG80

To access the Attendant menu:

•

Press M

ENU

button and 0 (Attendant); the following will display:

1. DATE/TIME SET
2. SET ICM ONLY MODE
3. RESTORE COS
  BACK        OK
4. MONITOR CONF ROOM
5. DELETE CONF ROOM

  BACK        OK

•

Date/Time Set

—Enter mm/dd/yy, and press OK Soft button;

enter hh/mm, and press OK Soft button.

•

Set ICM Only Mode

—Dial the Station Range for ICM only calls

(ex., 103-108=103108), and press the OK Soft button.

•

Restore COS

—Dial the Station Range for COS restoring (ex.,

103-108=103108), and press the OK Soft button.

•

Monitor Conference Room

—Enter the Conference Room

number to view the number of attendees in the Conference
Room.

•

Delete Conference Room

—Enter the Conference Room

number and press the OK Soft button to delete.

Summary of Contents for LDP-9008D

































































































































































































Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands

iPECS LDP-9008D, User Manual

Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands