iPECS LDP-9008D User Manual Download

Page: 145 / 192

LIP-8012E & LIP-8024E Gigabit Phone

User Guide

The Attendants and Secretary may be able to activate

DND Override

and

Intrude

on an active call. The

Attendants may also cancel DND at other stations.

3.8

Forwarding Calls

3.8.1

Forwarding calls to another Station or Voice Mail

Incoming calls may be diverted to other resources of the
system. Resources include other stations,

VMIM/VSF

Voice Mail

and

External Voice Mail

. Your LCD and

the LCD of the forward receiver will both indicate the
forward status.
Call Forward can be activated from your phone or from
a different station (

Call Forward, Remote

). You may

define the conditions or ‘type of forward’ as below:
1:

Unconditional

—all calls to the station, except

recalls, are forwarded.

Busy

—Immediately forwards all calls, except

recalls, when the station is busy.

No Answer—

forwards all calls to the station,

except recalls, when the station does not answer
within the No Answer timer.

Busy/No Answer—

forwards calls if the station is

busy or does not answer within the No Answer
timer.

When you forward calls from a different station, you
may need to enter your

Authorization Code

Calls on a Private Line will not forward except to a
station with an appearance of the Private Line or to
Voice Mail.

To toggle DND ON and OFF:

•

Press the DND button.

Summary of Contents for LDP-9008D

































































































































































































Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands

iPECS LDP-9008D, User Manual

Search results

Summary of Contents for LDP-9008D

Reviews:

Related manuals for LDP-9008D

Brands by name

Popular brands