iPECS LDP-9008D User Manual Download Page 102

Page: 102 / 192

LIP-7016D/7024D

User

Guide

Once logged in, place or receive one-way page announcements to/from

other users who are logged in to the same PTT group.

OPERATION

To log-in to a PTT group:



Dial #0 (iPECS-Lik)/538(iPECS-MG),



Dial the desired PTT group number (1-9 or 0 for all groups),

To log-out of the PTT group(s):



Dial #0 (iPECS-Lik)/538(iPECS-MG), the PTT Log-in/out code,



Press the * key.

To place a page announcement to the active PTT group:



Press and hold the

PTT

Flex button,



After confirmation tone, make page announcement.

8.5

Wake-Up Alarm

iPECS supports an Alarm clock for each station in the system. The

alarm clock can be set to repeat daily or as a one-time alarm.

When responding to the alarm by lifting the handset, BGM will be

provided.

OPERATION

To set the Wake Up Alarm clock:



Press

TRANS

PGM



Dial the Station User Program code 41(iPECS-Lik)/13(iPECS-MG),



Dial 2-digit hour and minute for alerting,



For a daily (repeating alarm), dial #,



Press

HOLD

SAVE

To erase Wake-Up:



Press

TRANS

PGM



Dial the Station User Program code 42(iPECS-Lik)/14(iPECS-MG),



Press

HOLD

SAVE

8.6

Alarm/Door Bell

The system can monitor external Alarm or Door Bell contacts:

Alarm Monitor—should the external contact activate, a unique Alarm

Ring signal and LCD display may be received. To restart the monitor

circuit, the external contacts must be deactivated and the Alarm Ring

signal terminated.

Summary of Contents for LDP-9008D

































































































































































































Search results

Summary of Contents for LDP-9008D

Reviews:

iPECS LDP-9008D, User Manual, Page: 102 / 192

Search results

Summary of Contents for LDP-9008D

Reviews: