iPECS LDP-9008D User Manual Download Page 132

Page: 132 / 192

LIP-8012E & LIP-8024E Gigabit Phone

User Guide

2.1.2

Conference Room

The User can create and delete Conference rooms.

•

ICM Ring/CO Ring—

Use Next Soft button to move through list of ring

types, and press OK Soft button to select.

•

Password Program—

Enter the current password and press the OK

Soft button, then enter the new password and press the OK Soft
button.

•

Language Program—

Use Navigation up/down buttons to highlight

available languages supported, and press OK Soft button to select.

•

Station Ring Download—

Select the ring position (5-8) and select the

ring file; press the SAVE Soft button to select.

•

Backlight—

Use Navigation up/down buttons to select the operation of

the backlight, and press the OK Soft button to select.

•

Font Program—

Use Navigation up/down buttons to select the LCD

Font, and press the OK Soft button to select.

To configure a Conference Room:

•

Press M

ENU

button and 2 (Conference Room),

•

The following menu displays:

1. CREATE CONF ROOM
2. DELETE CONF ROOM

•

BACK OK

•

Press the Navigation up/down keys to highlight and then press

the OK Soft button to select,
OR

•

Dial the number associated to the selection,

•

Enter the room number and dial the password,

•

Press the OK Soft button.

Summary of Contents for LDP-9008D

































































































































































































Search results

Summary of Contents for LDP-9008D

Reviews:

iPECS LDP-9008D, User Manual, Page: 132 / 192

Search results

Summary of Contents for LDP-9008D

Reviews: