LDP-9008D & LDP-9030D
User Guide
7
3.
R
ECEIVING CALLS
3.1 Answering a Call While Idle
There are 3 basic types of incoming calls; internal/external
ringing calls,
Intercom Voice Announce
calls, and
Hold
recalls.
Your phone may be assigned
Ringing Line Preference
; in this
case, calls that ring are answered by lifting the handset.
Otherwise, you must press the flashing Flex button.
External calls to a Phone will appear under the CO/IP line or a
LOOP
button.
External calls are from CO lines or VoIP channels that are
programmed to ring at your phone. For external calls,
Delay
Ring
may be assigned allowing others to answer the call
before the call rings at your phone.
Calls can be forwarded in some manner from another user; if
providing call coverage for other users, you may also receive
Station Call Coverage
calls.
Calls placed on
Hold
, including Transfers, parked calls, etc. will
recall if left on hold for too long.
ICM Voice Announce
calls are answered based on the
ICM
Signaling mode
at the receiving phone; in Hands-free (HF)
mode, after the splash tone and announcement, speak
normally into the microphone. In the Privacy (PV) mode, lift the
handset to respond. The
ICM Signaling mode
can be
assigned in
Station Programming
.
The LCD will display the calling number or, if available, the
name of the station or CO/VoIP line,
CO Line Name Display
.
To answer a call ringing at your phone:
•
Lift the handset or press the flashing Flex button (as
needed), the call will be connected.
To respond to an Intercom Voice Announce call:
•
In
HF
mode, simply speak as normal into the microphone,
OR
•
In
PV
mode, lift the handset to respond.
