160
IP-COM(config-if)# dot1x port-control force-authorized
Note:
Specify port control mode as force-authorized
IP-COM(config-if)# dot1x port-control force-unauthorized
Note:
Specify port control mode as force-unauthorized
IP-COM(config-if)# dot1x port-reauthentication
Note:
When the port control mode is PORT-based, you can enable port-reauthentication manually
IP-COM(config-if)# no dot1x
Note:
Disable 802.1X
802.1X status
IP-COM# show dot1x all
Note:
Display 802.1X global settings and port status
IP-COM# show dot1x statistics
Note:
Display all ports’ status
IP-COM# show dot1x interface gigabitethernet 0/1
Note:
Display a single port’s status
5.3.36 Save Configurations
IP-COM# copy running-config startup-config
Note:
Save current settings
IP-COM# copy running-config 192.168.111.79: mib.conf
Note:
Save current settings to local hard drive via TFTP server
IP-COM# copy startup-config 192.168.111.79: mib.conf
Note:
Save startup settings to local hard drive via TFTP server
Delete settings on port
IP-COM(config-if)#no cos
Note:
Delete priority settings on port; the default is 0
IP-COM(config-if)# flow-control off
Note:
Disable flow control.
IP-COM(config-if)# shutdown
Summary of Contents for G3224P
Page 1: ......
