102
Protocol
Select a protocol to match.
Source/Destination IP
Specify source IP and destination IP of packets for a rule to match.
Note: If Any is selected, the rule will match and apply to all packets with
whatever source IP/destination IP.
Source Port
Specify source port number to match TCP/UDP messages.
Note: If Any is selected, the rule will match and apply to any source port.
Source port is configurable only when TCP or UDP protocol is selected.
Destination Port
Specify destination port number to match TCP/UDP messages.
Note: If Any is selected, the rule will match and apply to any destination
port.
Destination port is configurable only when TCP or UDP protocol is
selected.
Action
Specify an action to handle messages:
Permit: Allow messages that match existing rules to pass device
Prohibit: Discard messages that match existing rules
Rate Limit: Limit forwarding rate of messages that match existing rules
(64~1048576kbps)
The default action is Prohibit.
Time Range ID
Select time range ID for rule application. Within the set time range, rules
will take effect. By default, no time range is specified and ACL rules take
effect at any time.
To modify ACL rules
Click the corresponding rule you wish to modify, configure required modifications and click
OK
.
Port ACL Binding
Click
QoS > ACL > Port ACL Binding
to enter interface below:
To display port binding rules, select a port and MAC based ACL and IP based ACL (if any) will appear in
corresponding lists.
Summary of Contents for G3224P
Page 1: ......
