131
Note:
Set port priority to 7
IP-COM(config-if)# flow-control on
Note:
Enable flow control
IP-COM(config-if)# no shutdown
Note:
Enable port
IP-COM(config-if)# storm-control broadcast level 20%
Note:
Set storm constrain ratio to 20%
IP-COM(config-if)# port-isolated
Note:
Enable port isolation
IP-COM(config-if)# mtu 9600
Note:
Set max jumbo frame size to 9600B on the port
5.3.11 Port Mirroring Configuration
IP-COM(config)# monitor destination interface gigabitethernet 0/8
Note:
Config port 8 as the mirroring destination port
IP-COM(config)# monitor source interface range gigabitethernet 0/1-3 rx
Note:
Config ports 1-3 as mirroring source ports and sniffer mode as Ingress.
IP-COM(config)# monitor source interface range gigabitethernet 0/4-5 tx
Note:
Config ports 4-5 as mirroring source ports and sniffer mode as Egress.
IP-COM(config)# monitor source interface gigabitethernet 0/6 both
Note:
Config port 6 as mirroring source port and sniffer mode as Egress & Ingress.
IP-COM(config)# no monitor
Note:
Clear mirroring settings
5.3.12 View RX/TX Packet Statistics
IP-COM# show interface gigabitethernet 0/2 counter
Note:
View RX packet statistics on port 2
IP-COM# show interfaces counter
Note:
View statistics on all ports
Summary of Contents for G3224P
Page 1: ......
