145
Config IGMP settings
IP-COM(config)# ip igmp snooping dyn-mr-aging-time 105
Note:
Config Max age of IGMP routing port
IP-COM(config)# ip igmp snooping host-aging-time 200
Note:
Config Max age of IGMP host port
IP-COM(config)# ip igmp snooping last-member-query-interval 4
Note:
Config group-specific query max response time
IP-COM(config)# ip igmp snooping querier max-response-time
Note:
Config group-general query max response time
Delete IGMP settings (Restore IGMP factory defaults)
IP-COM(config)# no ip igmp snooping dyn-mr-aging-time
Note:
Reset Max age of IGMP routing port to factory default
IP-COM(config)# no ip igmp snooping host-aging-time
Note:
Reset Max age of IGMP host port to factory default
Enable/disable IGMP port fast leave
IP-COM(config)# interface range gigabitethernet 0/1-4
Note:
Enter port configuration directory
IP-COM(config-if)# fast-leave on
Note:
Enable IGMP port fast leave
IP-COM(config-if)# fast-leave off
Note:
Disable IGMP port fast leave
5.3.23 Time Range Management
Configure time range
IP-COM(config)# timerange 99 absolute start time 11 23 2010 end time 08 16 2013
Note:
Configure absolute time
IP-COM(config)# timerange 67 weekday 8
Note:
Config periodic time
IP-COM(config)# timerange 12 periodic start time 03:40 end time 05:35
Note:
Config time slices
Summary of Contents for G3224P
Page 1: ......
