127
Chapter 5 CLI Configuration
5.1 Login
For login method, please see sections
3.2-3.3
, which describe available Telnet commands that can be used to
configure and manage the switch as well as how to manage the switch via the console port.
5.2 Features of Command Interface
The following lists and explains available commands for your references. The command line interface has the
following features:
Entering a question mark "?" displays online help.
The
Tab
key on your keyboard serves as a functional key to supplement a command. For example, you can only
enter a command string of "con" and press the
Tab
key to populate the rest automatically: if multiple matches are
found, they will all be displayed for your selection; if only one match is found, then it will be populated to the
"con" field automatically.
To go back to previous directory, press the "/" key. "/" is invalid in "IP-COM #".
To activate a command, press
Enter
after you finished entering it.
Three access rights are available for the command line interface:
admin—The administrator has absolute rights to manage the switch.
operator— The operator has all the same rights as administrator except rights to "Firmware Update", "User",
"Reset" and "Reboot" features.
user —The user has only the right to read/view switch's current settings but no right to manage/configure the
switch.
5.3 Command Line Configuration Guide
5.3.1 Commands for Entering Common Views
IP-COM# configure terminal
IP-COM (config)#
Note:
Enter configuration view
IP-COM (config)# interface gigabitethernet 0/1
IP-COM (config-if)#
Note:
Enter single-port view
IP-COM (config)# interface range gigabitethernet 0/1-24
IP-COM (config-if)#
Summary of Contents for G3224P
Page 1: ......
