IP-COM G3224P, User Manual

Page: 133 / 175

126
4.12 Save Configurations
Configurations on switch will be lost if they are not saved before switch reboots. So do save them on this screen
before you reboot the switch.
1. Save Current Settings
Use this feature to save device current configurations to ensure you will still have them on the switch even after
device restarts.
Note:
It takes about 10 seconds to save device current configurations. Do not operate or interrupt the switch during this
period. Otherwise parts of the configurations may be lost. When the page refreshes, the action of saving
configurations is completed.
2. Backup Settings
Once you have configured the device the way you want, you can save all settings to your local hard drive, which
can later be imported to the device in case that it is restored to factory default settings.
To back up current settings, click the Backup… button.
Note:
To backup current settings, you must first click Save to save them. Do not disconnect the device from power supply
and the management PC during this process.
3. Restore Previous Settings
To restore settings that are previously saved on your local hard drive, click the Browse… button to locate and
select the file and then click the Restore… button.