27
Note:
1. This device does not support half-duplex flow control. Enabling full duplex flow control can avoid packets loss,
but will influence the communication speed between source interfaces and other devices. Thus, do not enable full
duplex flow control on interfaces which connected to the Internet unless necessary.
2. Only ports in the same isolation group cannot intercommunicate. And intercommunication between ports within
an isolation group and ports outside such group will not be affected.
3. When a port in an aggregation group joins or leaves an isolation group, other ports in such aggregation group
will join or leave the same isolation group automatically.
4. When a port in an aggregation group leaves its aggregation group, other ports in such aggregation group will
remain in the same isolation group, namely, isolation properties for ports in an aggregation will not be affected.
5. When a not isolated port joins an isolated aggregation group, it joins the same isolation group automatically.
Port Mirroring
Port Mirroring allows copying packets on one or more ports to a mirroring destination port. You can attach a
monitoring device to the mirroring destination port to view details about the packets passing through the copied
port(s). This is useful for network monitoring and troubleshooting.
The switch provides local port mirroring functionality, namely, both mirrored ports and mirroring destination ports
are located on the same device.
Click
Port Management > Port Configuration > Port Mirroring
to enter interface below:
Fields on the screen are described below:
Field
Description
Mirroring Destination Port
Select a mirroring destination port. "None" indicates disabling the
mirroring feature.
A port cannot be set as the mirrored port and the mirroring
destination port simultaneously.
Only after a mirroring destination port is set, can you select
mirroring source port(s).
Summary of Contents for G3224P
Page 1: ......
