130
5.3.7 Reset and Reboot
IP-COM# erase startup-config
Note:
Delete all current settings and restore device to factory default settings
IP-COM# reload
Note:
Reboot switch (To restore factory defaults, system first deletes current settings and then restarts)
5.3.8 Firmware Update
IP-COM# archive download-sw 192.168.111.79
：
G3224_V100R004.bin
Note:
Load firmware from a TFTP server for upgrade
IP-COM#archive startup-config 192.168.111.79
：
mib.conf
Note:
Save firmware to local hard drive via a TFTP server
5.3.9 Web Login Timeout Configuration
IP-COM(config)# http redirect timeout 300
Note:
Config web login timeout interval as 300 seconds
IP-COM# show http redirect timeout
Note:
View web login timeout settings
5.3.10 Config Port Settings
IP-COM(config)# interface gigabitethernet 0/3
Note:
Enter the interface for configuring port 3
IP-COM(config)# interface range gigabitethernet 0/3-8,12,15
Note:
Enter the interface for configuring a batch of ports concurrently
IP-COM(config-if)# speed 100
Note:
Set port speed to 100
IP-COM(config-if)# speed auto
Note:
Set port speed to auto (auto-negotiation)
IP-COM(config-if)# duplex full
Note:
Set duplex to full duplex
IP-COM(config-if)#cos 7
Summary of Contents for G3224P
Page 1: ......
