Electrical Safety Notice
In the following situations, the electric power should be turned off and appropriate repairs,
replacements, or remedies should be taken.
•
The power cord or plug is damaged, frayed or shows heavy wear
•
The ioibox unit has been physically crushed or deformed
•
The ioibox unit has been exposed to water
•
The ioibox unit has been exposed to fire, intense heat or heavy smoke
•
Electrical connections of the ioibox unit become abnormally hot or smoke
•
The ioibox unit has been dropped, damaged or shows signs of loose internal parts.
•
The ioibox unit power light fails to illuminate or the ioibox unit does not operate
properly
•
The ioibox unit shows signs of damage from exposure to fumes or vapors
Preventing EMI
When wires run for a significant distance in an electromagnetic field, Electromagnetic Interference
(EMI) can occur.
Note:
•
Poor quality or worn wiring can result in Radio Frequency Interference (RFI)
•
Strong EMI, (e.g. lightning or radio transmitters) can destroy the ioiboxes, and can
pose an electrical hazard by conducting power through lines and into the system
.
To remedy EMI, consult RFI experts.
Introduction
The installation of the ioibox unit hardware is the first phase of making a ioibox unit operational in a
security plan. The goal of hardware installation is to physically place the unit, connect it to other
devices in the system and to establish network connectivity in preparation for phase two of the
installation process which is the camera setup and configuration of the ioibox.
When finished with the ioibox unit hardware installation, you will need to refer to the ioimage HTML
Edition Setup User Guide to complete the second phase of installation, which is the setup and
configuration of the ioibox unit.
4
