There are two possible combinations of connections converted from a single RJ45 port as follows
using the adapter cable:
•
Two RS232 connections
•
One RS485 connection and one RS232 connection
PTZ Control
The ioibox units support connection of control lines to the RS232/485 port (controller wire leads) for
a PTZ camera. Once connected the PTZ camera can be controlled from remote from within the
ioimage-Monitor and ioimage HTML Edition Setup using the built-in PTZ Remote Control Panel.
For more information on connecting the PTZ camera control lines, see the
section (page 40).
Installation
Installation of ioiboxes contains several steps. These steps are described in the following sections:
•
(page 32)
•
(page 46)
•
(page 47)
•
(page 51)
Unit Mounting
Warning:
To prevent injury when mounting or servicing ioiboxes in a rack, precautions
should be taken to ensure that the rack unit is stable.
The following guidelines to help ensure safety:
•
Observe the following precautions for rack stability and safety.
•
Refer to the rack installation documentation accompanying the rack for specific
warning and caution statements as well as procedures.
Component refers to any hardware unit mounted in the rack.
29