trk4000 Unit Front Panel
This section provides a short description of the trk4000 Unit front panel connections and
features.
1
2
4
3
6
5
trk4000 Front Panel
1.
LED INDICATORS
Indicator lights for each of the four channels. Each channel has a column of lights.
A Power Indicator
B
Operating Light
C
Unassigned
D
Unassigned
2.
LED POWER INDICATOR
The light indicator for power.
3.
Ethernet 10/100
Ethernet port for connecting an Ethernet cable to a local or wide area network
(LAN/WAN). There will be two IPs handled through this single connection: Channels 1
& 2 are Block 1 (first IP – Default 192.168.123.10) and Channels 3 & 4 are Block 2
(second IP – Default 192.168.123.11).
4.
Reset
Small opening that allows access to the button for hard-reset. Using a small pointed
object, such as a ballpoint pen, press to reset the ioimage Unit. Each reset button
affects two channels on the
as labeled.
5.
RS232 Channels 3 & 4
Serial port that supports one RS232 connection (RS232-1 setting). Primarily used for
connecting PTZ control. Note Channels 3 & 4 are on the second Block IP
configurations.
For more information on the pin-out for front panel RJ45 connections, see the
section (page 64).
Note
: An adapter cable RJ45 to 2 x RS232 DB9 + 1 RS485 lead wires can be purchased as
a separated accessory
Warning
: The RS232 standard specifies a maximum open-circuit voltage of +/-25 volts.
Exceeding this voltage can cause permanent damage to the unit.
13
