8.
Protective Earth Terminal
ioibox must have the external protective earth terminal permanently connected to
protective earth according to local regulations and codes. For more information, see
Connecting the External Protective Earth Terminal
(page 46).
trk8000 Unit Front Panel
This section provides a short description of the trk8000 unit front panel connections and features.
5
4
1
2
3
trk8000 Front Panel
1.
RESET
Small opening that allows access to the button for hard-reset. Using a small pointed
object, such as a ballpoint pen, press to reset the ioimage Unit. Each reset button
affects two channels on the
as labeled.
2.
Ethernet 10/100
Ethernet port for connecting an Ethernet cable to a local or wide area network
(LAN/WAN). There will be four IPs handled through this single connection: Channels 1
& 2 are Block 1 (first IP – Default 192.168.123.10) and Channels 3 & 4 are Block 2
(second IP – Default 192.168.123.11). Channels 5 & 6 are Block 3 (third IP– Default
192.168.123.12) and Channels 7 & 8 are Block 4 (fourth IP– Default 192.168.123.13).
3.
LED POWER INDICATOR
The light indicator for power.
4.
LED INDICATORS
Indicator lights for each of the four channels. Each channel has a column of lights.
A Power Indicator
B
Operating Light
C
Unassigned
D
Unassigned
5.
RS232/485 Channels
Serial port that can that supports one RS232 connection (RS232-1 setting). Primarily
used for connecting PTZ control. The RS232/485 ports will be configured under
different Blocks as follows: Channels 1 & 2 are Block 1 (first IP), Channels 3 & 4 are
Block 2 (second IP), Channels 5 & 6 are Block 3 (third IP) and Channels 7 & 8 are
Block 4 (fourth IP).
For more information on the pin-out for front panel RJ45 connections, see the
section (page 64).
Note
: An adapter cable RJ45 to 2 x RS232 DB9 + 1 RS485 lead wires can be purchased as
a separated accessory
19
