INVENTOR u-match on/off, Service Manual

Page: 127 / 163

U-MATCH AIR CONDITIONERS MAINTENANCE
124
Disassembly and Assembly of
electrical parts box
Remark: Make sure power supply of the unit is cut down before removal of electrical parts box or
electrical parts box modules.
Step Illustration Handling Instruction
1. Disassembly of cover of
electrical parts box
Cut off the power supply.
Disassemble fixing screw
between electrical parts box
cover and the box with
screwdriver
Take away and remove the
cover from electrical parts
box.
2. Pull away the power
supply wires for
components like motor, etc.
Disassemble electrical
components, like mainboard
inside the electrical parts
box connected with outer
componets (power-loaded
wires for componets like
compressor, motor).
Attention: Record right
position for wire connection
during disassembly of
connecting wires.
3. Disaasembly of electrical
parts box modules
Disassemble fixing screws
between electrical parts box
and middle clapbord, motor
support as well as right
panel with screwdriver.
4. Removal of electrical
parts box modules
Hold the bottom of
electrical parts box and lift
it upward to get rid of the
clip on the middle
clapboard.
Remove electrical parts
box modules.
Disassemble fixing screw of electric box