6
SYSTEM OVERVIEW
sMove controller
•
Installation and operating manual
2
System overview
The sMove controller is an electronic programming unit for controlling inVENTer
®
ventilation devices with heat recovery. It is available in the sMove s4 and sMove s8 versions.
Each sMove controller can control the following maximum number of ventilation units:
Ventilation units
sMove s4
sMove s8
iV-Smart+ / iV14-Zero /
iV-Light / iV-Compact
4 ventilation units
8 ventilation units
iV-Twin+ / iV25
2 ventilation units
4 ventilation units
It is characterised by a timeless and slim design, easy installation and a simple touch-based
operating concept.
The controller is operated by touching the capacitive buttons and the slide controller on the
control panel. The control panel also serves as a display surface due to integrated illuminated
displays.
The sMove can be used either as a base module or with additional sensors connected.
When used as a basic control unit, it is possible to select the operating mode of the ventilation
unit and to set the air volume flow, either continuously or in 4 predefined steps.
The connected ventilation unitss can be controlled in the following modes:
• Heat recovery • Pause function
•
Continuous ventilation • Off (only sMove standard version)
An external interface extends the functional scope by connecting a potential-free switching
contact: hygrostat, CO
2
sensor, VOC sensor
1)
(NO) or pressure switch (NC) or integration into
an existing home automation system via an analogue input.
Optionally, a CO
2
sensor and a humidistat can be purchased as an accessory from inVENTer
GmbH.
Features
•
available with flush-mounted switching power supply or cabinet switching power supply.
• available in Standard or Flat version.
1)
VOC = Volatile organic compounds
