25
INSTALLATION AND ASSEMBLY
sMove controller
•
Installation and operation manual
Installing the wall box
NOTE
Laying cables whilst live
damages the sMove controller!
• Lay and connect the cable only while in a voltage-free state.
•
The installation and connection must only be performed by qualified and trained personnel.
Filler for mounting the box
, flush-mounted/ plasterboard box min. 66 mm depth (optional
available)
Requirements:
The wall openings are created.
The cables are laid.
Ö
The wall box is mounted.
Proceed with installation of the operating unit (see section 5.7: Installing the operating unit)
►
Break out a cable entry
• for each pair of fans
• for the operating voltage cable
•
for the connection cable for the optional sensor
in the flush-mounted box.
►
Insert the prepared flush-mounted box into the
wall opening.
►
Fill the space between the interior wall and the box
with a suitable filler.
►
Lay the
• fan-BUS cables each in pairs
• operating voltage cable
• connection cable for the optional sensor
into the flush-mounted box.
