40
OPERATION
sMove controller
•
Installation and operating manual
Set the Boost function
The controller can be manually set to Boost to quickly remove moisture or odour peaks. In the
Boost function, the output of the reversing fan increases to 100 % for 15 minutes. The operating
mode is maintained.
The output is then lowered back to the original level.
Requirement:
The controller is in heat recovery or continuous
ventilation mode.
Ö
The controller is set to boost function.
►
Press the upper fan icon for at least
5 seconds.
Ö
The upper LED on the left side of the slide
control flashes in white:
6.5
Confirm filter change
After 180 days, the necessary filter change is indicated by a continuously flashing light next
to the operating mode button. The colour is defined by the current
operating mode:
•
Continuous ventilation mode is active: blue LED flashes.
•
Heat recovery mode is active: orange LED flashes.
If the filter has been changed, this must be confirmed on the controller.
Requirement:
The orange or blue LED flashes.
Ö
You have confirmed the filter change.
or
►
Press the button for longer than 5 seconds.
Ö
The LED stops flashing.
Ö
The filter change interval is set to 180 days.
5 sec
≥
5 sec
