manualshive.com logo in svg

inVENTer sMove S4 Long, Installation And Operating Instructions Manual

Share
Download
inVENTer sMove S4 Long Installation And Operating Instructions Manual Download Page 30

30

INSTALLATION AND ASSEMBLY

sMove controller 

•

 Installation and operating manual

5.7 

Installing the operating unit

The operating unit is mounted onto the installed flush-mounted or cavity wall box for the ope

-

rating unit. The fan cables for the versions with cabinet power supply unit and for the sMove s4 

with flush-mounted power supply unit are located inside the box and distributed in it.

 

To connect an optional sensor, e.g. CO

2

 sensor or to a home automation system, follow the 

instructions in grey italics.

Stripping tool, fan-BUS connection cable, 3-wire, terminal blocks, 5-pole (3 x)

Requirements: 

The mounting box is fitted.

The switching PSU is connected.

 

►

Pull the lever on the lower right side of the operat-

ing unit backwards (1).

 

►

Slide the base plate downwards as far as the stop 

(2).

Ö

The operating unit is unlocked.

 

►

Screw the operating unit base plate to the box 

using fixing screws.

Ensure that 

the arrow above the word TOP is 

pointing upwards.

 

►

Remove the base plate from the operating  

unit (3).

Ö

The base plate has been removed from the 

operating unit.

1

2

3

1

2

3

Summary of Contents for sMove S4 Long

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands