26
Pulsar extractor fan
•
Installation and operating instructions
Ö
The cover of the fan casing and the fan unit are installed.
►
Carefully insert the fan unit into the two guides (red
arrows) on the fan casing.
Ensure that
the fan unit is not tilted during installation.
This ensures that the feet and the fan are not damaged.
Ö
A clearly audible click confirms that the fan unit is
installed correctly.
►
Ensure that the fan can rotate freely before switching it on.
►
Connect the Pulsar extractor fan to the power supply.
►
Switch on the device:
230 V AC:
The switch is located on the left side of the fan
casing. Push it up into position 1.
12 V DC:
The fan runs when connected to the power
supply (if switch-controlled, the external switch is used to
turn the extractor fan on and off).
0
1
0
1
AC 230 V
INSTALLATION
