23
Pulsar extractor fan
•
Installation and operating instructions
►
Guide the voltage cable, 230 V, 50 Hz! or 12 V DC through
the newly created cable entry.
►
Insert the fan casing's base plate, including the rubber
seal, into the wall sleeve so that it covers the mounting
holes.
Make sure
that the word TOP is pointing upwards.
►
Screw the fan casing's base plate to the interior wall.
Ensure that the rubber seal completely seals the extractor
fan to the interior wall.
2
1
NOTICE
Over-shortened cable.
Cable cannot be reconnected after disassembly for maintenance work!
►
Do not excessively shorten the cable.
►
Shorten the voltage cable so that it reaches the respective
connection terminal (red arrows).230 V AC 3-pole connec-
tion terminal 12 V DC 2-pole connection terminal
Take care
not to lay the voltage cable over the PCB.
Ensure that t
he voltage cable is laid through the cable
entry. This ensures that the cables do not interfere with the
installation of the fan unit and prevents malfunctions of the
extractor fan.
AC 230 V
DC 12 V
INSTALLATION
