17
Pulsar extractor fan
•
Installation and operating instructions
TIP:
The aV100 wall installation set (wall sleeve including back-draught shutter and exterior closure), into which the
Pulsar extractor fan can be inserted, is available as an option from inVENTer GmbH.
DANGER
Exposed electrical components.
Electric shock and injury due to live components (230 V, 50 Hz)!
►
Before working on electrical installations, disconnect all affected equipment from the power supply.
►
Installation of the mains power cable must only be performed by qualified and trained personnel.
►
Install the aV100 wall installation set
(
instructions for aV100 wall installation set).
OR
►
Install another wall sleeve DN 100.
Ensure that
the (new or existing) wall sleeve does not
end flush to the interior wall. It is installed with an inner
distance of 5 mm (inside the wall).
Ensure that
an appropriate back-draught shutter is
provided and installed on site.
►
Lay the power cable, 3-wire, to the wall opening for the wall sleeve.
Ensure that the cable end protrudes approximately 300 mm into the interior space.
or
►
Lay the power cable, 3-wire, between the external switch/pushbutton and the wall opening for the wall sleeve.
Ensure that the cable end protrudes approximately 300 mm into the interior space.
or
►
Install the power supply unit.
Ö
The wall opening has been created and the wall sleeve is installed.
INSTALLATION
aV100 wall installation set
