6
Pulsar extractor fan
•
Installation and operating instructions
2
System overview
The Pulsar is an innovative extractor fan with a contemporary
design.
It improves the basic ventilation in your rooms and enables
continuous ventilation to reduce humidity and odours in wet
rooms (WC/bath/shower room/laundry room). Furthermore,
the Pulsar can be used as a wall-vent fan.
The Pulsar can be used in conjunction with the aV100 wall
installation set or installed in another wall sleeve with a
diameter of 100 – 140 mm (in this case a back-draught
shutter must be retrofitted on site). Installation is possible
in ceilings and exterior walls. If the Pulsar extractor fan is
used as a wall-vent fan, it can also be installed in interior
walls. The Pulsar can be connected directly to the 230 V
mains or via a power supply unit. Note that not all functions
are available when connecting to 12 V DC.
In order to ensure that the device does not interfere with
other ventilation processes and that its functioning is not
affected by them, it must always be installed in its own
wall sleeve. This must not contain any obstructions or other
objects that interfere with the airflow.In order to prevent
the accumulation of condensate (in winter) in wall sleeves,
they must be insulated at the places where they run through
unheated areas, such as cold attics.
Features
• Extractor fan with App control
• Can be installed in protection area 1 bath and shower
rooms in accordance with VDE 0100
• Wall or ceiling mounting possible
• 230 V connection (AC) or protective low voltage with
12 V connection (DC) possible
• Ultra-low-noise operation
• Control and set-up using the inVENTer Mobile app via
mobile device
• Humidity sensor with adjustable sensitivity
• Light sensor with adjustable sensitivity, run-on control
and delayed power-on
• Intelligent pause function, interval mode and boost mode
• Easy cleaning thanks to the easily accessible fan unit
Figure 1: Pulsar extractor fan with cover
SYSTEM OVERVIEW
7
6
3
3
2
1
2
1
4
4
5
1 Rubber seal
2 Fan casing’s cover
3 Fan
4 Fan unit
