22
Pulsar extractor fan
•
Installation and operating instructions
►
Create an entry for the voltage cable in one of the five
cable entries in the rubber seal. Use a screw driver or other
suitable tool.
Ensure that
you create the cable entry near the respective
terminal (red arrows).
45°
45°
45°
45°
AC 230 V
DC 12 V
►
Insert the fan casing into the wall sleeve from the interior.
Make sure
that the word TOP is pointing upwards.
►
Level the fan casing using a spirit level.To do this, place the
spirit level against the support points on the fan casing (red
arrows).
►
Mark the 3 mounting holes (blue areas).
►
Remove the casing from the wall sleeve and drill the holes.
R75
30°
65°
95°
DANGER
Exposed electrical components.
Electric shock and injury due to live components (230 V, 50 Hz)!
►
Before working on electrical installations, disconnect all affected equipment from the power supply.
►
Do not lay or connect live cables.
INSTALLATION
