7
inVENTer Connect controller platform | Installation instructions
SYSTEM OVERVIEW
2
System overview
The inVENTer Connect controller platform is an innovative control system for decentralised
iV ventilation devices with heat recovery featuring the use of the Connect inner cover from
inVENTer GmbH. Up to 16 devices or sensors can be integrated into the inVENTer Connect
controller platform.
Communication between the control unit and the devices takes place:
• by radio via the RF868MHz network or
• via a RS485 data cable.
The inVENTer Connect controller platform can be assembled with the following devices,
depending on structural and individual requirements:
2.1 Easy Connect e16 controller (incl. humidity/temperature sensor)
Construction
The Easy Connect e16 controller (in the following text "controller") is the control centre for the
inVENTer Connect controller platform. It is used to control and program the individual devices.
The controller also serves as the system interface for the "inVENTer Mobile" app (Android / iOS).
Communication between the mobile device and the controller takes place via
Bluetooth Low Energy (BLE).
The controller consists of a programming unit and a power supply unit with connecting terminals
and a fixing frame for installation on the flush-mounted box. The programming unit contains the
controller electronics, the user interface (5 capacitive sensor keys) and the display screen (Liquid
Crystal Display). It also has an integrated humidity/temperature sensor.
Figure 1: Front view of the Easy Connect e16 controller's programming unit
1 Base plate (power supply unit)
2 Programming unit
3 User interface (sensor keys)
4 Status LED (RGB LED)
5 Display screen (LCD)
6 Navigation keys
7
8 Mode key
9 Select key
10 Boost / Pause key
1
3
5
7
6
2
8
9
4
10
