29
inVENTer Connect controller platform | Installation instructions
PREPARING FOR INSTALLATION
►
Lay
• the mains connection cable (230 V AC)
• the RS485 data cable, if available
from the rear through the cable gland of the
housing.
►
Screw the housing into the dowels using the
screws.
The centring spigot of the flush-mounted
box is inserted over the wall sleeve and lies
flush against the stop.
NOTE:
If the housing is soiled, e.g. by
plaster residue,
it is no longer possible to
attach the inner cover electronics!
• Seal the housing dust-tight during the
entire construction process.
►
Reinsert the plaster protector into the housing.
The Connect inner cover housing is installed.
!
RS 485
(max. 0,8 mm²)
230 V AC
(max. 1,5 mm²)
