Removing Module
1.
Remove power module shrouds. See
.
2.
Unplug all cables from module.
3.
Loosen and remove screw
F
, washer
E
and lock
washer
D
4.
Remove module
B
.
Fig. 6-44
Installing Module
1.
Install module
B
to top latch
A
from downwards
direction.
2.
Swivel module to bottom latch
C
. Make sure that
module is correctly installed on inner sides of latches
(see figure on right side).
Fig. 6-45
3.
Ensure to install lock washer
D
alongside to
module. Lock washer must have contact to
module for proper working.
Re-install screw, washer and lock washer. Tighten screw.
4.
Re-install shrouds.
5.
Plug in cables.
6.
Perform calibration process. See in LiNX service manual.
7.
Test all functions.
Fig. 6-46
1654647-B
55
