Invacare® AVIVA™ RX series
8.
When fitting rim halves together, make sure that drill holes and threads for screws are placed exactly on top of
each other.
9.
Place joiner's clamps in position.
10. Tighten joiner's clamps alternately in small stages until rim halves are precisely aligned.
11. Install and tighten screws.
12. Remove joiner’s clamps.
13. Install wheel as described in respective chapter in this manual.
6.10.10 Replacing drive wheel hub
•
19 mm wrench
Removing drive wheel hub
1.
Loosen and remove nut (7).
2.
Remove washer (6).
3.
Remove distance ring (5).
4.
Remove wheel hub (4) from axle (2).
5.
Remove shim rings (3).
6.
Remove feather key (1) from axle.
Installing drive wheel hub
1.
Install drive wheel hub parts in reverse order.
2.
Use thin film of lubricant to easier install wheel hub on axle.
3.
Tighten nuts (4) to 60 Nm.
6.11 Electronics
6.11.1 Replacing Power Module
•
4 mm Allen key
54
1654647-B
