Invacare® AVIVA™ RX series
1.
Unplug all cables from the electronic modules which
run from seat to chassis.
2.
Loosen and remove screws
A
and washers
B
on both
sides.
3.
Remove seat including brackets
C
from chassis.
4.
Place seat on wooden blocks.
Fig. 6-61
5.
Loosen and remove screws
D
on both sides.
6.
Replace brackets
C
on both sides.
7.
Re-install screws. Tighten screws.
Fig. 6-62
8.
Place seat including brackets on chassis.
9.
Change position of seat according to required seat
depth. See
4.3 Adjusting Centre of Gravity — Ultra Low
10. Install screws
A
and washers
B
. Tighten screws.
11. Plug in all cables.
12. Test all functions.
66
1654647-B
