Invacare® AVIVA™ RX series
1.
Hold in place nut
A
on rear side of main frame. Loosen
and remove bolt
C
, washers
B
and nut
A
.
2.
Repeat previous step for remaining screwed connections.
3.
Remove bracket
D
including kerb climber.
Fig. 6-19 For better view only the bracket is shown.
4.
Install parts in reverse order.
5.
Test all functions.
6.8.3 Replacing Rubber Foot
1.
Pull front part of old rubber foot
B
off kerb climber
A
in forward direction.
2.
Place rear part of new rubber foot over kerb climber.
3.
Push front part of new rubber foot over kerb climber.
6.8.4 Replacing Tie-Down Points
The mobility device can be fitted with two additional tie-down points for easier access. If these points are retrofitted, the
existing tie-down points on the front of the main frame must not be used anymore.
•
5 mm Allen key
•
13 mm wrench
34
1654647-B
