7.
If a plug is loose, apply slight pressure to push plug into socket. The plug must snap in place securely.
8.
Check that plug is firmly attached to its socket.
9.
Install parts in reverse order.
10. Test all functions.
6.13 Lighting unit
6.13.1 Replacing Headlight
•
3 mm Allen key
•
8 mm wrench
•
Oblique pliers
•
Tie wraps
1.
Remove front part of main frame shrouds. See
2.
Unplug cable and cut tie wraps from headlight affected.
3.
Pull cable out of guidance.
4.
Loosen and remove nut
A
and washer
B
.
5.
Remove bolt
D
, washer
B
and headlight
C
.
6.
Replace headlight.
Fig. 6-58
7.
Install parts in reverse order.
8.
Route cables carefully and fix them with cable ties.
9.
Tighten nut finger-tight.
10. Test all functions.
11. Adjust headlight roughly using grid. User can carry out
final adjustment according to user manual.
6.13.2 Replacing Headlight Holder
•
3 mm Allen key
•
6 mm Allen key
•
8 mm wrench
•
13 mm wrench
•
Oblique pliers
•
Tie wraps
1654647-B
63
