Invacare® AVIVA™ RX series
6.7.7 Replacing Front Fender on Single-Sided Fork
Removing Fender
1.
Slightly press both hooks
A
together.
2.
Remove fender
B
backwards out of fork
C
.
Fig. 6-12
Replacing Bracket
CAUTION!
Risk of Crushing to Hands and Feet by Weight of Mobility Device
– Pay attention to hand and feet.
– Use proper lifting techniques.
CAUTION!
Risk of Uncontrolled Movement of Mobility Device
– Turn off power supply (ON/OFF key).
– Engage drive.
– Before raising mobility device, secure wheels by blocking them with wedges.
– Prevent the mobility device tipping by propping it up on a wooden block which is long and wide enough under
the battery case. If the wooden block is too short or too high, the mobility device can still tip.
•
TX30 Torx key
•
Oblong wooden block (at least 14 x 14 x 30 cm)
1.
Remove fender.
2.
Place wooden block underneath mobility device and
prop up mobility device.
3.
Remove wheel. See
6.10.8 Replacing Castor Wheels on
4.
Loosen and remove screw
F
, washer
D
and bracket
E
.
Fig. 6-13
30
1654647-B
