10. Test all functions.
Adjusting Suspension
•
17 mm wrench
•
Water pump pliers
•
Oblong wooden blocks (at least 7 cm x 7 cm x 30 cm)
•
Wooden block (at least 4 cm x 4 cm x 8 cm)
Recommended User Weight
Position
up to 70 kg
A
up to 110 kg
C
up to 136 kg
D
up to 160 kg
A
and
D
1.
Loosen screw of C.T.C. suspension. Do not remove
screw. See
6.8.5 Replacing C.T.C. Suspension, page 35
.
2.
Loosen and remove screw
E
and washer
F
.
3.
Tilt seat including main frame
I
forwards. Place
wooden block between carrier
J
and main frame
I
.
4.
Loosen suspension
G
.
5.
Move suspension to desired position
A
,
C
or
D
according to table. If required, install additional
suspension.
6.
Re-tighten suspension.
7.
Install screw and washer. Tighten screw to 17 Nm.
8.
Repeat previous steps for second suspension.
9.
Tighten screw of C.T.C. suspension to 20 Nm.
10. Test all functions.
Fig. 6-24
6.9 Drive Components
6.9.1 Replacing Motor-Gearbox Unit
•
13 mm wrench
•
19 mm wrench
•
Oblong wooden blocks (at least 14 x 14 x 30 cm)
Fig. 6-25
Component
Comments
A
Wheel
B
Wheel hub
1654647-B
37
