1.
Remove main frame shrouds. See
.
2.
Loosen and remove nuts
D
.
3.
Remove tie-down point
C
.
4.
Remove bolts
A
and washers
B
.
Fig. 6-20
5.
Install parts in reverse order.
6.
Test all functions.
6.8.5 Replacing C.T.C. Suspension
•
8 mm Allen key
•
17 mm wrench
•
19 mm open-ended wrench
•
Oblong wooden blocks (at least 7.5 cm x 7.5 cm x 30 cm)
Removing Main Frame
1.
Place wooden block underneath mobility device and
prop up mobility device.
2.
Remove seat.
3.
Loosen and remove screws
A
and washers
B
of rear
suspension on both sides.
4.
Loosen and remove screw
H
, rebound
D
and washer
C
of C.T.C. suspension.
5.
Remove main frame
G
upwards.
Fig. 6-21 For better view battery box and main frame are shown
partially only.
Replacing Shock Absorber / Bearing
1.
Replace shock absorber
F
and bearing
E
.
1654647-B
35
