Interphase ENTIA 5536 DM PRI, User Manual

Page: 72 / 244

Setting Up RAS Support Properties
52
Interphase Corporation
– If RAS is not installed , a message informs you that
RAS support setup is complete, and states that
Remote Access Services (RAS) setup must now be
installed .
Click OK . Then continue to step 4 .
– If RAS is installed , a message informs you that RAS
support setup is complete, and states that Remote
Access Services (RAS) setup must now be invoked .
Click OK . Then skip to Setting Up Channels as RAS
Ports on page 53 .
4. When the following message informs you that Setup
needs to copy Windows NT files, insert the Windows
NT CD:
Figure 4-12. Windows NT Setup Message
5. If you want Setup to find the Windows NT files in a
location other than the default, enter the complete path.
6. Click Continue to complete the RAS installation.
To continue the software installation, set up digital modem or
ISDN channels as RAS ports, as described in the next section,
Setting Up Channels as RAS Ports .