Chapter 6: Setting Up Calls
5536 PRI RAS Communications Controller Users Guide
103
Call Setup Display Columns
On the left side of the Call Setup dialog box, a tree view
graphically lists the 5536 WAN cards installed in the
computer. The following table provides information about the
columns in the tree view.
Column
Function
Cards
Displays all of the 5536 WAN cards detected in the
computer.
Services
Displays the list of services installed for each card.
Available services include:
•
ISDN RAS support service
•
DM support service, subdivided into the following:
–
DM RAS Support service
–
Serial Driver service
Ports
Displays available ports associated with the services:
•
PRI ports associated with the ISDN RAS service (one or
two ports). Connections to these ports are managed by
the ISDN RAS Support driver.
•
Modem port associated with the DM RAS support
service (one digital modem RAS port). Connections to
this port are managed by the Digital Modem RAS
Support driver.
•
Serial Driver COM ports associated with the Serial
Driver service. Connections to these ports are managed
by the Serial driver.
The number of serial driver ports is the number of COM
ports assigned on the Card Properties dialog box. (For
information about card properties setup, see
Summary of Contents for ENTIA 5536 DM PRI
