Appendix C: LoopTest Utility
5536 PRI RAS Communications Controller Users Guide
157
To show or hide the LoopTest event list, on the LoopTest main
dialog box, select
Display event list
from the
Test
menu.
To save the event list to an ASCII (text) file, select
Save
or
Save as
(to save a previously saved file with a different name)
from the
Test
menu.
Specifying the Number of Frames to Send
To specify the number of frames to send, do the following:
1.
On the LoopTest main dialog box, select the
Parameters
option from the
Test
menu.
The Test Parameters dialog box appears:
Figure C-2. LoopTest Parameters
2.
Enter the number of frames in the
Iterations count
field. The higher the iterations count, the longer the test
duration.
(The sub-address is not used for 5536-DM testing.)
Summary of Contents for ENTIA 5536 DM PRI
