Chapter 7: Managing Serial Driver COM Ports
5536 PRI RAS Communications Controller Users Guide
111
4.
When you are prompted to choose a port on which to
run detection, select the port where you want to declare
a modem.
Serial driver COM ports are named
COM
ixx
, where
i
is
the card number and
xx
is the port number. Card
numbers start with
0
; port numbers start with
01
.
To be available, Serial driver COM ports must be
assigned to the board. By default, eight Serial driver
COM ports (
COM
i
01
–
COM
i
08
) are assigned to each
5536-DM WAN board. (You can change COM port
assignments using the WAN Adapters Setup utility. For
information, see
5.
Click
Next
.
A message asks you to wait while Windows NT
attempts to detect your modem.
6.
If a modem is not detected, and you are prompted to
select your modem from a list, do the following:
a.
Click
Next
to display a list of modem manufacturers
and models.
b.
Select
Interphase
in the Manufacturers list, and
select
Interphase Digital Modem
in the Models
list. Then click
Next
.
7.
When you are asked on which port to install the modem,
select this or any other digital modem port(s) to be used
as the serial modem port(s). Then click
Next
.
8.
When you are informed that you will need to restart the
system before you can use the modem on the ports, click
OK
to continue.
Summary of Contents for ENTIA 5536 DM PRI
