Interphase ENTIA 5536 DM PRI, User Manual

Page: 225 / 244

Glossary
5536 PRI RAS Communications Controller Users Guide
205
(ANSI) Standard T1.618 and the International Telegraph and Tele-
phone Consultative Committee (CCITT) Standard Q.922, indicates the
functions associated with certain DLCI values:
DCD (Data Carrier Detect)
‹ See CD (Carrier Detect) .
DCE (Data Communications Equipment, Data Circuit-terminating
Equipment)
‹
Equipment that provides the functions required to
establish, maintain, and terminate a connection (including signal con-
version) for communications between the data terminal equipment and
the telephone line or data circuit. Also, interface signals typically pre-
sented by this equipment.
D channel
‹ Standard channel on an ISDN PRI or BRI line. At 16
Kbps, a D channel carries all signalling information and can carry low-
speed packet data such as X.25 packet switching.
DE
‹ See discard eligibility .
Demarc (demarcation point)
‹
The point on a customer's premises
where the line from the telephone company meets the customer's wir-
ing at the customer's premises.
DFT
‹
See Distributed Function Terminal .
Directory Number
‹ Your seven-digit telephone number (without the
area code), as found in the telephone directory. Each BRI connection
can have up to two Directory Numbers, one for each B channel.
Discard eligibility (DE)
‹ A bit indicating that a frame may be dis-
carded in preference to other frames if congestion occurs to maintain
the committed information rate. See also
excess burst size (Be) and
CIR .
DLCI
Values Function
0
In-channel signalling
1-15
Reserved
16-991
Assigned using frame-relay connection procedures
992-1007
Layer 2 management of frame-relay bearer service
1008-1022
Reserved
1023
In-channel layer management