Intermec Sabre 1555, Programmer'S Reference Manual

Page: 63 / 178

Interactive Programming Mode
4-23
4
Product Reset Command (PRC = 0x3F)
PRC restarts the product, e.g., to quit temporary remote control mode initiated by the
ESA command.
The syntax is as follows:
<STX> <PRC> <FM> <CHK> <ETX>
The response is as follows:
<ACK>
<STX> <ACC> <FM> <CHK> <ETX>
Application Examples
Binary Frame Example
Send binary frame => STX, BFR, 6, 1, 5, 3, 9..., CHK, ETX
Reply <= “frame-received” ACK
Reply <= STX, ACC, CHK, ETX (message data OK)
Send => “frame-received” ACK
Multiple Frame Message
Send 1st frame => STX, BFR, Size 1, Size 2, D
0
, D
1
, D
2
...D
n
, More = 1, CHK, ETX
Reply <= ACK character
2nd and last frame => STX, BFR, D
n+1
, D
n+2
...D
n+n
, More = 0, CHK, ETX
Reply <= ACK character
Reply <= STX, ACC, CHK, ETX (message data OK)
Send => ACK character