manualshive.com logo in svg

Intermec Sabre 1555, Programmer'S Reference Manual

Share
Download
Intermec Sabre 1555 Programmer'S Reference Manual Download Page 173

System Specifications

E-5

E

Communications

The Sabre 1555 uses either 2450- or 915-MHz unlicensed FCC spread-spectrum 
frequency-hopping.

Host Interfaces

RS-232 C or RS-232 TTL, depending on application or cable.

Software Features

RFID reader/programmer software fully supports ANS NCITS 256-1999 for item 
management.

Configuration

Configuration setup is done via EasySet configuration software for Windows. Print 
and scan a bar code menu or download a configuration via online or IMC setup.

Data Rate

The Sabre 1555 can read 8 bytes of data from a tag in less than 12 ms, and can write a 
single byte of data to a tag in less than 25 ms.

2450 MHz

IMC deactivated (1555 in sleep mode, no 
LCD)

<1

IMC activated

100

Bar code decode ON

200

IMC activated, RF submodule ON, no RF 
commands

350

IMC activated, RF submodule ON, RF 
commands

1000

Table E-3  Sabre 1555 Current Use with RF Power On (continued)

Version

Parameters

Current Use (mA)

Summary of Contents for Sabre 1555



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands