Intermec Sabre 1555, Programmer'S Reference Manual

Page: 34 / 178

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
3-6
Quick Mode Select
The Sabre 1555 provides the operating mode selections listed in the following
sections.
Bar Code Read
This option reads bar code data.
Tag Identify
This option displays tag IDs of all tags read.
Tag Read
This option reads specified data from tags.
Tag Write
This option writes specified data to tags.
Tag Read/Write (Tag RW)
This option reads specified data from and writes specified data to tags.
Tag Filter
This option enables filter function for tags to be identified.
Tag Filter/Read (Tag FR)
This option enables filter function for tags to be identified and reads specified data
from those tags.
Tag Filter/Write (Tag FW)
This option enables filter function for tags to be identified, and writes specified data to
those tags.
Tag Filter/Read/Write (Tag FRW)
This option enables filter functions for tags to be identified, and reads specified data
from and writes specified data to those tags.
Tag Filter Settings
This feature activates/deactivates from 1 to 4 eight-byte filter masks (filter criteria) to
isolate the specific tags you want to identify, read data from, or write data to. The four
masks may be set individually or combined with the other masks. For example, you
may want to isolate tags with both “Intermec” at position 32 (e.g., mask 1) AND
“2000” at position 60 (e.g., mask 4).
Filters are only applied if requested by the selected operating mode. By default, no
masks are active (no filtering), and all tags are read.
Use EasySet to define the filter mask parameters for each mask:
•
Start address
—
position of the first character the mask applies to (any position
in the tag between 0 and 127) (default is 0 for all masks)