Intermec Sabre 1555, Programmer'S Reference Manual

Page: 28 / 178

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
2-8
7. Pull the trigger to cycle through the other Setup options or press and hold the
trigger to go directly to
Exit Setup .
8. When you get to Exit Setup , press the Mode button two times to exit Setup .
9. Press and hold the Mode button to see which operating modes are now available
in Quick Mode Select.
Interactive Configuration of the 1555 Using a Host System
With this operational mode, commands pass directly from a host system through the
main communications port to the 1555’s internal drivers. The operator can control the
1555 remotely from a host system. All generated responses pass directly from the
1555 to the main communications port.
This interactive mode controls the 1555 audiovisual (A/V) indicators, LCD, laser bar
code scanner, and RFID reader/programmer module. Figure 2-3 shows an overview of
the interactions between the components and the setup and interactive command
modes.
Figure 2-3 Overview of Interactive Operating Mode
Chapter 4, “Interactive Programming Mode,” describes the remote control command
structures in detail.