Intermec Sabre 1555, Programmer'S Reference Manual

Page: 84 / 178

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
4-44
Table 4-30 shows the remote control acceptance request description.
Table 4-31 shows the remote control low-level ACK time-out request description.
Table 4-32 shows the remote control high-level ACC time-out request description.
Table 4-29 Baud Rate
Command Name
Baud Rate <TYPE> <CMD>: \0D\41 + Prms
Description
The baud rate of the UART is changed to the specified parameter value.
Parameters
[0 - 0x0A] respectively for 75, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600 bauds
Responses
ACC (command accepted)
NAC (command not recognized)
Table 4-30 RC_AccRequest
Command Name
RC_AccRequest <TYPE> <CMD>: 0D\4D\43 + Prms
Description
Selects whether high-level frame acknowledgment is or is not required (only for
ACC, NAC type; this does not affect other responses.)
This parameter is only applied to the AccRequest bit in BFR frames.
Parameters
[0 - 1]; 0: deactivated; 1: activated (default)
Responses
ACC (command accepted)
NAC (command not recognized)
Table 4-31 RC_lowlevel_ACK_time-out
Command Name
RC_lowlevel_ACK_time-out <TYPE> <CMD>: 0D\4C\53 + Prms
Description
The time-out determines the wait time for a low-level acknowledgment (ACK/NAK
character) before reattempting the transmission.
Parameters
[10 - 500] ms; see Appendix C to determine the value. The default value is 100 ms.
Values < 10 msec = 10 msec Values > 500 msec = 500 msec
Responses
ACC (command accepted)
NAC (command not recognized)