Intermec Sabre 1555, Programmer'S Reference Manual

Page: 32 / 178

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
3-4
Tag Filter Settings
o
1) @ 0 =
????????
o
2) @ 0 =
????????
o
3) @ 0 =
????????
o
4) @ 0 =
????????
Exit
Activates/deactivates from 1 to 4 filter masks
(criteria) to isolate desired tags.
Tag Read Settings
•
1) @ 24 Length8
o
2) @ 0 Length0
o
3) @ 0 Length0
o
4) @ 0 Length0
Exit
Note: The tag read setting for
selection 1 @ 24 Length 8 is
activated.
Activates/deactivates from 1 to 4 read fields.
Tag Write Settings
o
1) @ 24 Length0
NO DATA
o
2) @ 24 Length0
NO DATA
o
3) @ 24 Length0
NO DATA
o
4) @ 24 Length0
NO DATA
Exit
Activates/deactivates from 1 to 4 write fields.
LCD Settings Show tag ID: Yes/No
Data format: ASCII/hex
Co 090%
Contrast – 090%
Exit Defines LCD screen options.
Communication RS-232 (19200,8,N,2)
Exit Displays the desired communication protocol.
Reset Factory defaults: No/Yes
Exit Global reset of all parameter settings.
Data Buffer [-----] 000%
Store in buffer: No/Yes
Send buffer
Clear buffer
Exit Data buffer stores tag or bar code ID data in
the Sabre 1555. Select enabling or disabling
data buffer, send data over serial port, and
clearing buffer.
Firmware Versions *Sabre 1555PDT 2.15*
*RFID board 3.10*
*LCD board 1.4*
Exit Displays the firmware versions currently
loaded in the product.
Exit Setup Save
No save
Return to setup Saves changes and quits Setup mode.
Table 3-1 Autonomous Mode Options (continued)
Setup Screen Display Setup Menu Option Display Description