Intermec Sabre 1555, Programmer'S Reference Manual

Page: 100 / 178

Sabre 1555 RFID & Bar Code Reader Programmer’s Reference Manual
4-60
Command Name
Code Interleaved 2/5 Check CIP HR
Checked but Not Transmitted <TYPE> <CMD>: \0D\43\42
Description
Parameters
None
Responses
ACC (command accepted)
NAC (command not recognized)
Command Name
Code Interleaved 2/5 Check Not
Active <TYPE> <CMD>: \0D\43\43
Description
Parameters
None
Responses
ACC (command accepted)
NAC (command not recognized)
Command Name
Code Interleaved 2/5 Fixed Lengths <TYPE> <CMD>: \0D\43\44 + Prms
Description
Choose 1, 2, or 3 fixed lengths provides the best performance and security if your
application has fixed lengths (minimum length = 2)
Parameters
[2 - 50] hexadecimal, each parameter is separated by the value FNC4 (0x64)
e.g., two lengths 10, 6 = \0D\43\44\0A\64\06 (length values must be provided in
descending order)
Responses
ACC (command accepted)
NAC (command not recognized)
Command Name
Code Interleaved 2/5 Minimum
Length <TYPE> <CMD>: \0D\43\45 + Prms
Description
Choose a minimum length to optimize decoding performance and increase security,
select the same length as the minimum length in your application
Parameters
[0; 2 - 50], hexadecimal, zero is special value to accepts any valid length (2 or more)
Responses
ACC (command accepted)
NAC (command not recognized)
Table 4-34 Bar Code Decoding Commands (continued)