122
6. In response to the question in the dialog that displays, click OK.
7. From the Partition menu, select Commit Changes Now.
8. When asked to save the changes, click Yes.
9. When asked to restart the system, click Yes.
10. When asked to update the emergency repair information, click OK.
11. When asked to restart the system, click OK.
12. After the system has restarted, log on to Windows NT and run Disk Administrator.
13. Select the newly created RAID disk drive stripe set by clicking one of the rectangles
(drives) representing the stripe set.
14. From the Tools menu, select Format.
15. Select NTFS as the file system type; then select Start.
16. In the next dialog that displays, select OK.
17. In the next dialog that displays, select Yes.
18. When told formatting is complete, select OK.
19. Select Close to close the Format dialog.
20. From the Partition menu, select Exit.
After creating the stripe set, you should save the disk configuration information for future
use (for example, if you have to reinstall the operating system). Refer to Disk Administrator
Help for instructions on saving and restoring the disk configuration information.
Troubleshooting
This section provides the troubleshooting solutions for various problems that might occur
with the host system and InterRAID-8e disk arrays. If problems persist, or are not covered
in this chapter, call the Customer Response Center at 1-800-633-7248.
